Engineering Tools
Cable Weight Calculator
Calculate the approximate weight per unit length of power cables based on construction parameters. Results are estimates based on standard industry formulas and typical material densities.
Cable Construction Parameters
Enter the cable specification to calculate estimated weight.
Calculation Results
PendingConfigure parameters and click
Calculate Weight to see results.
Estimated Cable Weight
--
kg/m
Total Weight
--
kg per 1000 m
Overall Diameter
--
mm (approx.)
Weight Breakdown by Component
| Component | kg/m | Share |
|---|---|---|
| Total | -- | 100% |
Cable Designation (Auto-generated)
--
Disclaimer: Results are estimates based on standard IEC formulas and typical material densities. Actual cable weight may vary ±5-15% depending on manufacturing tolerances, stranding factors, and specific material grades. Always verify against manufacturer datasheets for procurement.
Material Density Reference
| Material | Density (kg/m³) | Use |
|---|---|---|
| Copper (Cu) | 8,900 | Conductor |
| Aluminum (Al) | 2,700 | Conductor |
| Steel (Wire/Tape) | 7,800 | Armor |
| XLPE | 940 | Insulation |
| PVC | 1,400 | Insulation / Sheath |
| LSZH | 1,600 | Insulation / Sheath |
| EPR | 1,250 | Insulation |
| Rubber | 1,200 | Insulation / Sheath |
| PE | 930 | Insulation / Sheath |
Cable Weight Calculation Report
Shandong Jinda Special Cable Group Co., Ltd.
info@jindacablegroup.com
jindacablegroup.com
This calculation is an estimate based on IEC standard formulas. Results may vary ±5-15% from actual cable weight. Always verify against manufacturer datasheets. Generated by Jinda Cable Weight Calculator.
